Spork Boards

Sporkers Helping Sporkers

tomierna's Avatar Picture tomierna (Admin) – December 07, 2007 08:51PM Reply Quote
Well, why not? this is a community, after all.

Bruce Robertson – January 27, 2008 11:18PM Reply Quote
My GF has Windows XP and a new web cam. What are the best ichat compatible video options? We got AIM working OK at first but that was when I had my Macbook there at her house just to test. When I tried to get it working later and I was actually at home, we couldn't make it work.

Mokers (Moderator) – January 28, 2008 06:56AM Reply Quote
Formerly Remy Martin
I've been having good success with Skype, however the thing that usually causes incompatibilities is firewall settings on one or both computers. I was having trouble ichatting with my parents (both computers were 10.4 at the time), and we had to turn off some of the firewall settings on their router before stuff would work.

El Jeffe – January 28, 2008 07:33AM Reply Quote
What a journey.
FYI - My Canon scanner stopped working with Leopard. The CanoScan software was revved since I bought it, and I actually like it somewhat. But, even when going to Canon's download site, which I think they are VERY OS X FRIENDLY for their stuff, the d/ls they have do not fix the issue. I was able to delete all the old stuff, and find a NEWER v5 CanoScan software (newer than what they say will work with my Scanner) and rebooted and all is fine now.

The VueScan software, though, CONTINUED TO WORK...but I do not like it's interface. It's good and generic, but I like CanoScan's integration with their own scanners better.

Just fyi. (not article-worthy)

What a journey.

rino – January 28, 2008 08:31AM Reply Quote
In America, the only respectable form of socialism is socialism for the rich.
That Hammerick (sp?) can continue to out develop and out support scanners for multiple platforms than the manufacturers is quite a story indeed.

VueScan is the only scanner software I've used for many years now.

Cloudscout – January 28, 2008 08:41AM Reply Quote
Det finnes ikke dårlig vær, bare dårlige klær!
I wish VueScan could be used as a TWAIN driver in Photoshop so I don't have to use a two-step process.

ddt – January 28, 2008 12:37PM Reply Quote
where does one buy a "safe case open tool" (like shown here)? circuit city? radio shack?

ddt

Cloudscout – January 28, 2008 01:02PM Reply Quote
Det finnes ikke dårlig vær, bare dårlige klær!
Radio Shack would be my first stop.

John Willoughby – January 28, 2008 01:03PM Reply Quote
Cyberdyne Systems Customer Support
A cow-orker got those tools for free when he bought a battery upgrade for his iPod.

El Jeffe – January 28, 2008 01:19PM Reply Quote
What a journey.
just use a nail file, knife, credit card, or what not.

What a journey.

tliet – January 28, 2008 01:28PM Reply Quote
Funny that you should bring up the Canon scanner thing today Bill. Yesterday I was close to posting a cry for help here since the LIDE25 scanner of Canon was really struggling hard NOT to work on my mum's iMac. Reinstalling the 2 driver versions that are on the website a few times finally brought the damn thing to life again. From what I've read tho, is their driver software one big pile of steaming ...

I've also checked Vuescan but I'll let my mother give Canon's software a shot first.

El Jeffe – January 28, 2008 02:49PM Reply Quote
What a journey.
Yep, mine is the LiDE 20. I really like it for what it does. I installed the v5.0.1.2. Their site says NOTHING about this version for the lide 2x/3x, from what I see.

Now, I can't even find the link I got it from....(looking)...

okay, here it is.

http://www.macupdate.com/info.php/id/12288

It sure was wonky getting it installed. Not at all like the first time I ever did. But, perhaps on a fresh install of Leopard it would be smoother.

What a journey.

tliet – January 28, 2008 08:04PM Reply Quote
Hmm, that's interesting. I've used the Canon site to find drivers and got no further than a 4.9 something...

Yep, also the Canon USA site only comes back with that version.

So, how come MacUpdate has a newer one? Also, the reviews tell basically the same story that I ran into. How do manufacturers get away with such shite?

edit; I get it now, the newer version only supports newer scanners. Nice...



Edited 1 time(s). Last edit at 01/28/2008 08:06PM by tliet.

El Jeffe – January 29, 2008 12:32AM Reply Quote
What a journey.
NO. V5 is running just fine with my old LiDe 20 scanner.

What a journey.

tliet – January 29, 2008 04:55AM Reply Quote
OK, well, since it sort of works now, I'll leave it alone...

Dr. Strangelove – January 29, 2008 10:07AM Reply Quote
So, how the fsck do I draw a straight line with the brush tool in Photoshop CS?

The online help says that I can create a path and then stroke it with the brush tool. (No comments from the peanut gallery, please.) But the "Stroke Path" menu item is always greyed out, as far as I can tell. Any help greatly appreciated.

binky – January 29, 2008 10:18AM Reply Quote
You have to create a new path first (from the popup in the paths palette), then draw it. If you draw a path first, PS wants to make it a vector mask.

Dr. Strangelove – January 29, 2008 10:28AM Reply Quote
Excellent! Thank you.

tliet – January 29, 2008 12:03PM Reply Quote
Is there a html/css guru in the house?

My girlfriend had never seen HTML before, a few months ago I installed Seamonkey on her flower power iMac and she started building her site in it (the word slow doesn't really describe the way that Mac feels). After 2 days Seamonkey was degraded to a text editor with preview, she didn't use the graphical HTML editor anymore, she was already deep into css and xhtml and I didn't have a clue anymore what she was doing.

So her site works now: http://www.bricolore.nl/

However, she'd like to make the top border and framework smaller since it kind of takes up a lot of display real estate, but doesn't know where to begin.

Anybody have a clue?



Edited 1 time(s). Last edit at 01/29/2008 12:03PM by tliet.

stan adams – January 29, 2008 12:58PM Reply Quote
It looks like like a fairly clean stylesheet - just reduce the height value in:

#header {
margin-bottom: 5em;
padding: 0em;
text-align:center;
height: 11em;

the file is styles.css



Edited 1 time(s). Last edit at 01/29/2008 01:01PM by stan adams.

rino – January 29, 2008 01:23PM Reply Quote
In America, the only respectable form of socialism is socialism for the rich.
Shift restrains any tool in PS to a straight line.

Sorry, only registered users may post in this forum.

Click here to login